8T (HOWO A7 Chassis) Sinotruk HOWO A7 Truck Mounted Crane
Product Parameter
SPECIFICATION FOR CRANE |
|||
Max Lifting Capacity | 8000 kg | ||
Max Lifting Moment | 20 T.M | ||
Max Oil Flow of Hydraulic System | 55 L/min | ||
Max Pressure of Hydraulic System | 27 MPa | ||
Rotation Angle | All Rotation | ||
Max.Working radius (m) | 11.5 m | ||
Supporting Leg | Two Supporting Leg with Hydraulic Control | ||
SPECIFICATION FOR CHASSIS |
|||
Dimension(Lx W xH)(mm) | 10415×2496×3850 | ||
Loading Capacity (Ton) | 25 Ton | ||
Cargo body size (LxWxH) (mm) | 6750×2300×600 ,Bottom 3 mm, Side 2 mm | ||
Approaching angle/Departure angle(°) | 15/12 | ||
Overhang(front/rear) (mm) | 1540/2875 | ||
Wheel base (mm) | 4600+1400 | ||
Max speed(km/h) | 102 | ||
Curb weight(kg) | 14525 | ||
Engine(Steyr technology, made in China) | Model | WD615.69,water-cooled,four strokes,6 cylinders in line with water cooling,turbocharged and intercooling, directly injection | |
Fuel type | Diesel | ||
Power, max(kw/rpm) | 336HP | ||
Emission | EUROII | ||
Fuel tanker capacity(L) | 400L aluminum oil tank | ||
Transmission | Model | HW19710, 10 speeds forward and 2 reverse | |
Brake system | Service brake | Dual circuit compressed air brake | |
Parking brake | spring energy, compressed air operating on rear wheels | ||
Steering system | Model | ZF8118 | |
Front axle | HF9 | ||
Rear axle | HC16 | ||
Tire | 12.00R22.5 (Radial Tyre) | ||
Electrical system | Battery | 2X12V/165Ah | |
Alternator | 28V-1500kw | ||
Starter | 7.5Kw/24V |
Relevant Knowledge
Oil Change
The vehicle and diesel engine are horizontal, and the engine can be replaced at least 10 minutes after the diesel engine is shut down Oil.
Put an oil receiver under the diesel engine.
Unscrew and remove the oil drain plug ② on the oil pan ① to drain the waste oil.
After installing a new composite seal ring ③, screw in the oil drain plug ② on the oil pan.
Install a new oil filter
Screw out the 2 oil filter element assemblies ④ from the oil filter base ⑤ to the left and right.
Screw the new filter element assembly ④ into the oil filter base ⑤.
Note: A new oil filter must be installed every time the diesel engine oil is changed.