Sinotruk Howo Chassis Parts- Front Brake Lining WG9100440029
Basic information
JCHHR supply full range SINOTRUK, HOWO, HOWO PART, HOWO SPARE PARTS,STEYR, WEICHAI,WABCO, WABCO VALVES, WABCO BRAKE PART, SHACMAN, SHACMAN F2000 PARTS, SHACMAN F3000 PARTS, SINOTRUCK, SITRAK spare parts,professional service and good price
HOWO spare parts,HOWO dump truck parts,Original HOWO parts,HOWO truck parts,HOWO A7 truck spare parts,Genuine HOWO truck parts,Original HOWO spare parts,HOWO 371 truck spare parts,
HOWO part, HOWO tipper truck, HOWO 336, HOWO 371, HOWO concrete mixer, HOWO 70T,HOWO 70T mining truck parts, HOVA, HOVA 60, HOVA mining truck, HOVA parts, HOVA 60T, STEYR WD615,Original STEYR spare parts, STEYR 91 series, STEYR dump truck, STEYR WD618, WEICHAI,Original WEICHAI parts, Genuine WEICHAI part, WEICHAI spare parts, WEICHAI WD615, WEICHAI WP10, WEICHAI WP12, WD615,WD615 engine parts, WD615.47, WD615.69, WD615 336hp, WD615 371hp, WD618 diesel engine parts, WD618 420hp, D10 engine parts, D12 engine parts.
Specifications
PRODUCT NAME |
Front Brake Lining |
OE NO. |
WG9100440029 |
BRAND NAME |
SINOTRUK Howo |
MODEL NUMBER |
WG9100440029 |
TRUCK MODEL |
WP10, WP12, WP6, WP7, WP5, WP4, WP3, WD615, WD618 |
PLACE OF ORIGIN |
Shandong, China |
SIZE |
Standard Size |
CERICATION |
CCC |
APPLICABLE |
Howo |
FACTORY |
CNHTC SINOTRUK |
TYPE |
BELT |
MOQ |
1pc |
APPLICATION |
ENGINE SYSTEM |
QUALITY |
High-Performance |
MATERUAK |
Rubber |
PACKING |
Standard Package |
SHIPPING |
By sea, By air |
PAYMENT |
T/T |
Relevant Knowledge
To what extent do truck brake pads need to be replaced?
Trucks are driven year-round and many components wear out, and truck brake pads are one of the vulnerable parts. As the most important part of a car, brake pads can save the safety of car personnel at critical moments, and the consequences of brake failure are very serious. When it is found that the brake pads are worn to the safety warning line, it is very important to replace them in time. So, to what extent are truck brake pads worn?
In fact, the service life of truck brake pads cannot be determined by definite mileage and time. Depending on the material, everyone's driving habits, road conditions, frequency of use, and degree of wear and tear will vary. Some cars are replaced every tens of thousands of kilometers, and some cars are not necessarily replaced every 100,000 kilometers.
You can use the following methods to determine whether a replacement is required.
1. Judging from the thickness The thickness of a new brake pad is about 1.5 cm, and the wear thickness will gradually become thinner during use. When the naked eye sees that the thickness has been worn down to one-third of the original, the car owner should pay more attention to check the brake pads and be ready to replace them at any time. Some models may not be visible to the naked eye because the wheels used are different. Do not remove the tire. the
2. Listen to the sound. There is the sound of iron tools rubbing against each other when braking lightly. There will also be the sound when the brake pads are just installed, which is just the sound of running-in. If you hear this sound while driving, you should replace it immediately, because the limit marks on both sides of the brake pads have rubbed against the brake disc. Once this happens, not only the brake pads should be replaced, but also the brake disc should be observed, so that the friction brake disc will also be damaged. If it is found that there is still abnormal noise after replacing the brake pads, the brake disc must be replaced. the
3. Braking feels very difficult. At this time, the brake pads have basically lost their friction, and I want to replace them. If you continue to use the brakes, the brakes may fail, and the speed will cause a car accident.