Sinotruk Howo Chassis Parts- Steering Tie Rod Arm AZ9719410043
Basic information
JCHHR supply full range SINOTRUK, HOWO, HOWO PART, HOWO SPARE PARTS，STEYR, WEICHAI，WABCO, WABCO VALVES, WABCO BRAKE PART， SHACMAN, SHACMAN F2000 PARTS, SHACMAN F3000 PARTS, SINOTRUCK, SITRAK spare parts，professional service and good price
HOWO spare parts，HOWO dump truck parts，Original HOWO parts，HOWO truck parts，HOWO A7 truck spare parts，Genuine HOWO truck parts，Original HOWO spare parts，HOWO 371 truck spare parts,
HOWO part, HOWO tipper truck, HOWO 336, HOWO 371, HOWO concrete mixer, HOWO 70T，HOWO 70T mining truck parts, HOVA, HOVA 60, HOVA mining truck, HOVA parts, HOVA 60T, STEYR WD615，Original STEYR spare parts, STEYR 91 series, STEYR dump truck, STEYR WD618, WEICHAI，Original WEICHAI parts, Genuine WEICHAI part, WEICHAI spare parts, WEICHAI WD615, WEICHAI WP10, WEICHAI WP12, WD615，WD615 engine parts, WD615.47, WD615.69, WD615 336hp, WD615 371hp, WD618 diesel engine parts, WD618 420hp, D10 engine parts, D12 engine parts.
Specifications
|
PRODUCT NAME |
Steering Tie Rod Arm |
OE NO. |
AZ9719410043 |
BRAND NAME |
SINOTRUK Howo |
|
MODEL NUMBER |
AZ9719410043 |
TRUCK MODEL |
WP10, WP12, WP6, WP7, WP5, WP4, WP3, WD615, WD618 |
PLACE OF ORIGIN |
Shandong, China |
|
SIZE |
Standard Size |
CERICATION |
CCC |
APPLICABLE |
Howo |
|
FACTORY |
CNHTC SINOTRUK |
TYPE |
BELT |
MOQ |
1pc |
|
APPLICATION |
ENGINE SYSTEM |
QUALITY |
High-Performance |
MATERUAK |
Rubber |
|
PACKING |
Standard Package |
SHIPPING |
By sea, By air |
PAYMENT |
T/T |
Relevant Knowledge
What is the function of a car tie rod? The function of car tie rods:
1. The straight rod and tie rod are the two main components of a car's steering system. The straight rod is a rod that connects the steering gear arm and the left arm of the steering knuckle. It transmits directional power to the steering knuckle to control the wheels, and the tie rod is connected to the left and right steering arms;
2. One can synchronize the two wheels, and the other can adjust the toe-in. The end of the steering rod is connected to the steering knuckle through a ball joint;
3. Due to the greater force exerted by directly turning the wheels, most cars nowadays use hydraulic steering to reduce the driver's effort and make steering more flexible and easy to operate.
What are the symptoms of a broken steering linkage
In daily life, the steering system of automobiles has always been highly valued.
Because if there is a problem with the steering system of a car, it will affect the handling experience of the car, the service life of the tires, and the driving safety of the driver.
Let's take a look today. What are the symptoms of a broken steering rod? The tie rod is an important component to ensure good steering of the left and right tires of a car. The steering tie rod bears the responsibility of transmitting the power of the steering rocker arm to the steering knuckle arm.
The failure of the steering linkage is mainly due to the failure of the steering linkage ball joint.
The ball head of the steering tie rod is located on the tie rod, and together with the tie rod, it achieves power transmission of different axles.
So there may be the following symptoms of steering rod ball joint failure: at low speeds, the wheels and tires will shake, jump, and sway.
Hard steering is prone to vehicle deviation.
The rubber sleeve of the ball joint is damaged and there is oil leakage.
The tire fell off while driving and was thrown out of the car.
In daily maintenance, we should not neglect the maintenance of the steering ball joint. During maintenance, we can clean and lubricate it, and inspect the rubber sleeve of the ball joint for damage.
This also demonstrates the importance of regular car maintenance.
Once the above situations occur, which seriously threaten driving safety, do not delay.
Driving is nothing small. Once the steering linkage is damaged, it should be promptly inspected and maintained at a 4S store or repair shop.
The correct handling method for sudden loss of control of steering
Today, I will share with you the correct handling method when the steering suddenly loses control. Driving a vehicle is very dangerous when the steering wheel suddenly loses control. In general, it is recommended that you follow the following methods for handling.
Brake the vehicle, turn on the dual flashing warning lights, and inform nearby vehicles of danger information.
Under the premise of ensuring safety, set up safety warning signs at the rear of the vehicle body, call the rescue phone as soon as possible, and wait for the trailer to handle.
When the driver discovers abnormal steering during normal driving, the correct approach is to slow down as soon as possible, park in a safe place, and identify the cause.
For vehicles equipped with power steering, the driver suddenly finds it difficult to turn and the operation is laborious. He should slow down as soon as possible, choose a safe place to park, and identify the cause.
After losing control of steering, if the vehicle deviates from the straight direction of travel, it is necessary to decisively and continuously press and release the brake pedal to slow down and stop the vehicle as soon as possible.
When the vehicle loses control of its turn, deviates from the direction of travel, and an accident is inevitable, it is necessary to slow down as soon as possible, try to shorten the stopping distance, and reduce collisions.
High speed vehicles need to brake urgently when they lose control of their steering, which can easily cause a rollover.
When the driver notices a sudden malfunction in the steering, but is still able to turn, try to slow down the speed and drive to a nearby repair shop before driving.
If the vehicle is allowed to maintain a straight line with the road ahead after sudden steering loss of control, emergency braking must not be applied.
