Sinotruk Howo Truck Parts AC Belt VG2600060317
Product Description
The main function of the air conditioning belt is to drive the air conditioning compressor, hang it on the crankshaft pulley, and tighten it by the air conditioning belt tensioner to make the air conditioning compressor operate normally.
SINOTRUK HOWO Truck Parts AC Belt VG2600060317 is suitable for SINOTRUK and other heavy duty brand trucks. Especially for HOWO, HOWO A7, STEYR and so on.
Specifications
| PRODUCT NAME | AC BELT | OE NO. | VG2600060317 | BRAND NAME | Sinotruk Howo |
| MODEL NUMBER | VG2600060317 | TRUCK MODEL | WP10, WP12, WP6, WP7, WP5, WP4, WP3, WD615, WD618 | PLACE OF ORIGIN | Shandong, China |
| SIZE | Standard Size | CERICATION | CCC | APPLICABLE | SINOTRUK |
| FACTORY | CNHTC SINOTRUK | TYPE | BELT | MOQ | 1pc |
| APPLICATION | ENGINE SYSTEM | QUALITY | High-Performance | MATERUAK | Rubber |
| PACKING | Standard Package | SHIPPING | By sea, By air | PAYMENT | T/T |
Basic Information
Impact of belt tightness on air conditioner:
The tightness of the compressor drive belt can directly affect the use effect of the automobile air conditioner. If the compressor belt is too loose, the air conditioning system will have poor refrigeration. Adjust the compressor belt in time. If the compressor belt slips seriously, there will be a "squeak" noise when the air conditioner is started. At this time, the waiting owner should replace the belt and the belt; The tightness of the compressor transmission belt also directly affects the life of the electromagnetic clutch.
Relevant knowledge
Alternator Belt Fault phenomenon and cause
The correct use and maintenance of the Alternator Belt belt is also the key to ensure its normal use and avoid early damage:
(1) The specification and size of the Alternator Belt belt shall be suitable for the size of the pulley.
(2) The pulley groove surface shall not be excessively worn. Otherwise, early wear and fracture of the Alternator Belt will occur.
(3) During installation, first loosen the tensioner, put the Alternator Belt into the groove, and then tighten it.
(4) Check and adjust the deflection between the pulleys so that it does not exceed 20 '.
(5) The tension of Alternator Belt should not be too large or too small. Too much tension will shorten the service life of the belt and axle, and too little tension will make the belt slip.
