ZZ3257N3647N1 Sinotruk HOWO A7 Dump Truck
Product Parameter
SPECIFICATION | |||
Dimension(Lx W xH)(unloaded)(mm) | 8265×2496×3490 | ||
Cargo body size (LxWxH) (mm) | 5400x2300x1500 Sand body,Middle lifting, Bottom 8 mm, Side 6 mm | ||
Approaching angle/Departure angle(°) | 20/27 | ||
Overhang(front/rear) (mm) | 1540/1650 | ||
Wheel base (mm) | 3625+1350 | ||
Max speed(km/h) | 78 | ||
Curb weight(kg) | 12270 | ||
Engine(Steyr technology, made in China) | Model | WD615.69 | |
Fuel type | Diesel | ||
Power, max(kw/rpm) | 336HP | ||
Emission | EUROII | ||
Fuel tanker capacity(L) | 300L aluminum oil tank | ||
Transmission | Model | HW19710, 10 speeds forward and 2 reverse | |
Brake system | Service brake | Dual circuit compressed air brake | |
Parking brake | spring energy, compressed air operating on rear wheels | ||
Steering system | Model | ZF8118 | |
Front axle | HF9 | ||
Rear axle | HC16 | ||
Tire | 12.00R20 | ||
Electrical system | Battery | 2X12V/165Ah | |
Alternator | 28V-1500kw | ||
Starter | 7.5Kw/24V | ||
Cab | Characteristics of A7-W Luxury Driving Cab: Four-point suspension plus airbag and horizontal stabilizer; one sleeper with air conditioning; air suspension seat with armrest; encircled curtains and MP5 entertainment systems; electrically adjusted rear-view mirror with the function of heating; electrically lifted glass; manually and electrically raised driving cab. |
Relevant Knowledge
Maintenance of paint surface
1. Minor paint damage shall be repaired immediately.
2. Timely conduct anti-corrosion protection on the paint surface.
Clean the cab interior
1. Clean the steering wheel, gear lever, dirty interior trim and carpet with warm water and detergent solution. No Use detergent.
2. Use alcohol to remove oil stains (gasoline is not allowed).
3. When the temperature is below 30 ℃, wash the curtain with flexible detergent.
4. Clean the safety belt with warm water and soap, and do not use chemical detergent.
5. In frost weather, the doors and windows shall be sealed with talcum powder to prevent the doors and windows and sealing strips from freezing together.
Cleaning and maintenance of seats and berths
1. Clean the plastic parts (such as belt, support frame and control rod) with a damp cloth. It is often dirty and can be cleaned with solvent (such as detergent).
2. Clean the interior trim and cushion with special wet cleaning cloth, or dry foam and soft brush.