page_banner

product

Manufactur standard Transmission Oil And Filter - ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng


Product Detail

Product Tags

Related Video

Feedback (2)

We stick with the theory of "quality first, company first, steady improvement and innovation to satisfy the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our provider, we deliver the items together with the fantastic good quality at the reasonable value for , , , For additional queries or should you might have any question regarding our goods, make sure you do not hesitate to call us.
Manufactur standard Transmission Oil And Filter - ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng Detail:

Product Parameter

SPECIFICATION
Dimension(Lx W xH)(unloaded)(mm) 8585×2496×3490
Cargo body size (LxWxH) (mm) 5600x2300x1500 Sand body,Middle lifting, Bottom 8 mm, Side 6 mm
Approaching angle/Departure angle(°) 20/24
Overhang(front/rear) (mm) 1540/1870
Wheel base (mm) 3825+1350
Max speed(km/h) 78
Curb weight(kg) 12300
Engine(Steyr technology, made in China) Model WD615.69
Fuel type Diesel
Power, max(kw/rpm) 336HP
Emission EUROII
Fuel tanker capacity(L) 300L aluminum oil tank
Transmission Model HW19710, 10 speeds forward and 2 reverse
Brake system Service brake Dual circuit compressed air brake
Parking brake spring energy, compressed air operating on rear wheels
Steering system Model ZF8118
Front axle HF9
Rear axle HC16
Tire 12.00R20
Electrical system Battery 2X12V/165Ah
Alternator 28V-1500kw
Starter 7.5Kw/24V
Cab Characteristics of A7-W Luxury Driving Cab:
Four-point suspension plus airbag and horizontal stabilizer; one sleeper with air conditioning; air suspension seat with armrest; encircled curtains and MP5 entertainment systems; electrically adjusted rear-view mirror with the function of heating; electrically lifted glass; manually and electrically raised driving cab.

Relevant Knowledge

Hydraulic lifting bridge

Working principle and operation of lifting bridge:
The operating medium of the lifting bridge is high-pressure oil, which controls the hydraulic cylinder through the hydraulic valve.

The working principle of the hydraulic system is shown in the figure below:

ZZ3257N3847N1_001

Lifting operation:

When the vehicle is stationary and the engine is idling, open the protection unit of the hydraulic control valve, lift the handle to the lifting position, the hydraulic oil enters the lower chamber of the working cylinder through the high-pressure oil pipe, and the piston rod is pushed out

The push arm 4 of the working cylinder rotates on the rotating shaft 2. When the stroke is reached, the roller 5 on the push arm presses the top of the equalizer arm 11. If the working cylinder continues to extend, the load of the driven axle decreases, and the rear suspension

The leaf spring of the frame will deform; When the load is reduced to 0, the leaf spring stops deforming, the hydraulic cylinder 8 continues to extend, the balance arm 11 turns over the balance shaft, and the driven axle rises. When the leaf spring stops deforming

After that, the vehicle frame starts to rise; When the lifting bridge reaches the limit position, release the operating handle, and the handle will automatically return to the middle position. The hydraulic working cylinder is locked hydraulically, and the lifting bridge is lifted and locked for operation

Handle.

Drop operation:

When the vehicle is stationary and the engine is idling, open the protection unit of the hydraulic control valve, press the handle to the falling position, the high-pressure oil enters the upper chamber of the working cylinder through the high-pressure oil pipe, and the piston rod retracts

When the push arm 4 rotates on the rotation axis 2, the bridge will descend due to its own gravity. When the bridge falls to the ground, the piston cylinder continues to retract to the limit position, pushing the push arm 4 and the roller 5 up to a distance of 11 from the balance arm

The highest point of about 60mm. After releasing the handle, the handle will automatically return to the middle position. The hydraulic cylinder is self-locking. Then the bridge will fall to the ground. Lock the handle.


Product detail pictures:

Manufactur standard Transmission Oil And Filter -
 ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng detail pictures

Manufactur standard Transmission Oil And Filter -
 ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng detail pictures

Manufactur standard Transmission Oil And Filter -
 ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng detail pictures

Manufactur standard Transmission Oil And Filter -
 ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng detail pictures


Related Product Guide:

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Manufactur standard Transmission Oil And Filter - ZZ3257N3847N1 Sinotruk HOWO A7 Dump Truck – JieCheng , The product will supply to all over the world, such as: Bangladesh , Tajikistan , New Orleans , Why we can do these? Because: A, We are honest and reliable. Our products have high quality, attractive price, sufficient supply capacity and perfect service. B, Our geographical position has a big advantage . C, Various types: Welcome your inquiry, It will be highly appreciated.
  • This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Lilith from moldova - 2018.06.18 17:25
    Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Charlotte from Bogota - 2017.09.26 12:12
    Write your message here and send it to us
    buynow