SINOTRUK – Piston Ring Set – Engine Components For SINOTRUK HOWO WD615 Series Engine Part No.: VG1560030050
Basic information
JCHHR supply full range SINOTRUK, HOWO, HOWO PART, HOWO SPARE PARTS,STEYR, WEICHAI,WABCO, WABCO VALVES, WABCO BRAKE PART, SHACMAN, SHACMAN F2000 PARTS, SHACMAN F3000 PARTS, SINOTRUCK, SITRAK spare parts,professional service and good price
HOWO spare parts,HOWO dump truck parts,Original HOWO parts,HOWO truck parts,HOWO A7 truck spare parts,Genuine HOWO truck parts,Original HOWO spare parts,HOWO 371 truck spare parts,
HOWO part, HOWO tipper truck, HOWO 336, HOWO 371, HOWO concrete mixer, HOWO 70T,HOWO 70T mining truck parts, HOVA, HOVA 60, HOVA mining truck, HOVA parts, HOVA 60T, STEYR WD615,Original STEYR spare parts, STEYR 91 series, STEYR dump truck, STEYR WD618, WEICHAI,Original WEICHAI parts, Genuine WEICHAI part, WEICHAI spare parts, WEICHAI WD615, WEICHAI WP10, WEICHAI WP12, WD615,WD615 engine parts, WD615.47, WD615.69, WD615 336hp, WD615 371hp, WD618 diesel engine parts, WD618 420hp, D10 engine parts, D12 engine parts.
Specifications
PRODUCT NAME |
VG1560030050 |
OE NO. |
VG1560030050 |
BRAND NAME |
SINOTRUK Howo |
MODEL NUMBER |
VG1560030050 |
TRUCK MODEL |
WP10, WP12, WP6, WP7, WP5, WP4, WP3, WD615, WD618 |
PLACE OF ORIGIN |
Shandong, China |
SIZE |
Standard Size |
CERICATION |
CCC |
APPLICABLE |
Howo |
FACTORY |
CNHTC SINOTRUK |
TYPE |
BELT |
MOQ |
1pc |
APPLICATION |
ENGINE SYSTEM |
QUALITY |
High-Performance |
MATERUAK |
Rubber |
PACKING |
Standard Package |
SHIPPING |
By sea, By air |
PAYMENT |
T/T |
Relevant Knowledge
As the "heart of the truck", the engine provides a continuous stream of power for the truck. If there is a problem, it not only affects the use of the vehicle, but also takes time and effort to wait for repair. Therefore, daily maintenance and repair is very important. Today, the editor has brought you six steps to save money and maintain your "heart".
1. Running-in
This is the basis for extending the service life. Both new and overhauled engines must be run-in according to regulations before they can be put into normal operation.
2. Oil purification, water purification, gas purification, and body purification
Diesel fuel is the main fuel for engines. If diesel fuel is not pure, it can cause wear on the precise mating body, increase the mating clearance, cause oil leakage, oil dripping, reduce the oil supply pressure, increase the clearance, and even cause serious failures such as clogging of the oil circuit, burning of bearings, and so on.
If the air contains a large amount of dust, it will accelerate the wear of cylinder liners, pistons, and piston rings. If the cooling water is not pure, it can cause scale blockage in the cooling system, hinder engine heat dissipation, poor lubrication conditions, and severe engine wear. If the external surface of the machine body is not clean, the surface will be corroded and the service life will be shortened.
3. Oil, water, air
If the supply of diesel and air is not timely or interrupted, there will be difficulties in starting, poor combustion, reduced power, and abnormal engine operation. If the oil supply is insufficient or interrupted, the engine will suffer from poor lubrication, severe engine wear, and even shingles. If the cooling water is insufficient, the temperature of the machine will be too high, the power will decrease, the wear will increase, and the service life will be reduced.
4. Frequently inspect fastening parts
Due to the impact of vibration and uneven load during the use of diesel engines, bolts and nuts are easily loosened. Also, the adjusting bolts at all parts should be inspected to avoid accidents that may cause looseness and damage to the body.
5. Check adjustment
The valve clearance, valve timing, fuel supply advance angle, injection pressure, and ignition timing of a diesel engine should be checked and adjusted in a timely manner to ensure that the engine is often in good technical condition, thereby saving fuel and extending its service life.
6. Proper use of the engine
Before driving, lubricating parts such as bearing shells should be lubricated. After starting, it is recommended to wait for the water temperature to reach 40 ℃ - 50 ℃ before putting into operation. Prolonged overload or low speed operation is strictly prohibited. Before stopping the machine, unload the load and reduce the rotation speed.
Card users must pay attention to the maintenance of the engine in their daily lives, which can not only avoid some unnecessary troubles, but also extend the service life of the engine, truly achieving travel without worry~