page_banner

product

16T Hook Lift Truck Sinotruk HOWO Garbage Truck

Engine(Steyr technology, made in China): WD615.62,water-cooled,four strokes,6 cylinders in line with water cooling,turbocharged and inter-cooling, directly injection

Transmission Model: HW19710, 10 speeds forward and 2 reverse

Steering system: ZF8118      Front axle: HF9      Rear axle: HC16

Cabin: HOWO 76 New face cab


Product Detail

Product Tags

Product Parameter

Dimension(Lx W xH)(unloaded)(mm) 10100×2496×2980
Max. Lifting Force 16t
Height of Hook 1570mm
Lifting Up Time ≤40s
Lifting Down Time ≤50s
Discharging Time ≤50s
Discharging Angle 50°
Hydraulic System Pressure 30MPa
Locking Device of Garbage Box external hydraulic locking
Length Range of Garbage box(mm) 5000mm (AROUND 20 CBM)
Approaching angle/Departure angle(°) 15/13
Overhang(front/rear) (mm) 1500/2375
Wheel base (mm) 4600+1350
Max speed(km/h) 102
Curb weight(kg) 11060
Engine(Steyr technology, made in China) Model WD615.62,water-cooled,four strokes,6 cylinders in line with water cooling,turbocharged and inter-cooling, directly injection
Fuel type Diesel
Power, max(kw/rpm) 266HP
Emission EUROII
Fuel tanker capacity(L) 400L aluminum oil tank
Transmission Model HW19710, 10 speeds forward and 2 reverse
Brake system Service brake Dual circuit compressed air brake
Parking brake spring energy, compressed air operating on rear wheels
Steering system Model ZF8118
Front axle HF9
Rear axle HC16
Tire 295/80R22.5
Electrical system Battery 2X12V/165Ah
Alternator 28V-1500kw
Starter 7.5Kw/24V
Cab HOWO 76 New face cab

Relevant Knowledge

Headlamp setting (adjustment)
Left and right adjusting nodes ① of low beam lamp: use a screwdriver to turn the adjusting point to a proper position.
Low beam lamp up and down node ②: use a screwdriver to turn the adjustment point to a proper position.
Upper and lower nodes ③ of high beam lamp: use a screwdriver to turn the adjustment point to a proper position.
Fog lamp and auxiliary high beam lamp up and down node ④: Use a screwdriver to turn the adjustment point to a proper position.
Left and right adjusting points of high beam ⑤: Use a screwdriver to turn the adjusting point to a proper position.

16T Hook Lift Truck Sinotruk HOWO Garbage Truck_001
16T Hook Lift Truck Sinotruk HOWO Garbage Truck

Causes of lamp fogging
Headlamps will generate a lot of heat when they are lit, which needs to be dissipated through the air vent, and at the same time, the external moist air.
The body can also easily enter the interior of the lamp through the vent hole, and fog will be generated in the process of cold and hot air exchange Qi.
This phenomenon usually occurs in winter, rainy season or humid climate and regions.
In this case, if the fog disappears automatically within 45 minutes after the headlight is turned on, it should be considered as normal.


  • Previous:
  • Next:

  • Write your message here and send it to us
    buynow