Sinotruk Howo WD615 Engine Parts-Outlet Valve VG1560050041
Basic information
JCHHR supply full range SINOTRUK, HOWO, HOWO PART, HOWO SPARE PARTS,STEYR, WEICHAI,WABCO, WABCO VALVES, WABCO BRAKE PART, SHACMAN, SHACMAN F2000 PARTS, SHACMAN F3000 PARTS, SINOTRUCK, SITRAK spare parts,professional service and good price
HOWO spare parts,HOWO dump truck parts,Original HOWO parts,HOWO truck parts,HOWO A7 truck spare parts,Genuine HOWO truck parts,Original HOWO spare parts,HOWO 371 truck spare parts,
HOWO part, HOWO tipper truck, HOWO 336, HOWO 371, HOWO concrete mixer, HOWO 70T,HOWO 70T mining truck parts, HOVA, HOVA 60, HOVA mining truck, HOVA parts, HOVA 60T, STEYR WD615,Original STEYR spare parts, STEYR 91 series, STEYR dump truck, STEYR WD618, WEICHAI,Original WEICHAI parts, Genuine WEICHAI part, WEICHAI spare parts, WEICHAI WD615, WEICHAI WP10, WEICHAI WP12, WD615,WD615 engine parts, WD615.47, WD615.69, WD615 336hp, WD615 371hp, WD618 diesel engine parts, WD618 420hp, D10 engine parts, D12 engine parts.
Specifications
PRODUCT NAME |
VG1560050041 |
OE NO. |
VG1560050041 |
BRAND NAME |
SINOTRUK Howo |
MODEL NUMBER |
VG1560050041 |
TRUCK MODEL |
WP10, WP12, WP6, WP7, WP5, WP4, WP3, WD615, WD618 |
PLACE OF ORIGIN |
Shandong, China |
SIZE |
Standard Size |
CERICATION |
CCC |
APPLICABLE |
Howo |
FACTORY |
CNHTC SINOTRUK |
TYPE |
BELT |
MOQ |
1pc |
APPLICATION |
ENGINE SYSTEM |
QUALITY |
High-Performance |
MATERUAK |
Rubber |
PACKING |
Standard Package |
SHIPPING |
By sea, By air |
PAYMENT |
T/T |
Relevant Knowledge
Inspection methods for various valve components of engines
1. Check method for one-way valve
The simplest way to judge its quality is to put it in your mouth to blow/suck, and it is normal if only one side can pass
2. EGR valve inspection method
Disconnect one of the inlet or outlet connectors of the cooler coolant and the GR valve coolant pipe connector, connect and secure a tuning air supply hose on the disconnected coolant pipe, and place the EGR cooling shadow into the hot water tank. The EGR cooler must be completely submerged in water, and a certain amount of air pressure must be applied to check for any bubbles emerging from the cooler. Verify that the bubbles are not caused by loose pipe joints or residual air, If the EGR cooler leaks, it must be replaced.
Due to severe carbon accumulation, the internal valve core cannot function properly, resulting in the failure of the EGR valve, causing unstable idling, decreased power, and easy stalling of the vehicle
3. PCV inspection method. This valve is mostly a one-way valve (also integrated), and the opening of the valve body is controlled based on the vacuum degree on the intake manifold side (the greater the vacuum degree, the smaller the valve body opening). To check the quality of the PCV valve, the pipeline between the PCV valve and the vacuum source can be clamped under high speed conditions. If the engine speed drops within a range of 50r/min or higher, it is considered normal. Otherwise, the PCV valve and pipeline should be checked for blockages and cleaned or replaced if necessary.
。 Run the engine at a critical speed and remove the PCV valve from the valve cover. After unplugging, if you can hear a "gradual mouth" sound and place your finger on the air inlet of the PCV valve to feel a strong vacuum suction, it is normal. Install the PCV valve and remove the oil port cover. When the engine is idling, place a piece of hard paper gently at the oil port. It is normal for the paper to be adsorbed at the oil port within 60 seconds.
4. Electromagnetic valve inspection method
Generally speaking, the quality of electromagnetic words (whether they are stuck or not) can be directly supplied with power, and the movement of the valve body can be sensed with your fingers. It can also be checked for its good or bad (whether it is ineffective) by measuring its resistance.